-40%
REPLACEMENT RETRO FIT KIT GAS FUEL TANK FOR STIHL FS106 TRIMMER
$ 20.03
- Description
- Size Guide
Description
FOR SALE IS A GREAT RETRO KIT WE HAVE DESIGNED TO FIT A NEW GAS FUEL TANK ONTO YOUR FS106 STIHL TRIMMER. YOU WILL GET THE FOLLOWING PARTS:1 GAS FUEL TANK - WITH CAP 1 GAS TANK VENT 2 BOLTS 4 NUTS 1 FRONT PLATE ( USES EXISTING SCREWS ) 1 REAR MOUNTING PLATE WITH PLASTIC COVER ( USES EXISTING SCREWS )** LAST PHOTOS ARE OF THIS INSTALLED. JUST TO GIVE A LITTLE DETAIL. MOTOR HOUSING OR OTHER PARTS NOT INCLUDED ***** COME ON PEOPLE THIS IS NOT ROCKET SCIENCE. THIS IS A RETRO FIT TANK KIT. THE TANK IS NOT THE SAME AS THE OEM TANK. THAT IS WHY WE HAVE INCLUDED CUSTOM BRACKETS AND HARDWARE TO FIT THIS TO YOUR FS106 TRIMMER.Fuel tank in BOX 3311
Hardware in BOX UP 69
1 REMOVE OLD TANK KEEP SCREWS
2 SCREW BRACKET TO TANK PIC 5
3 REMOVE 2 LOWER SCREWS AND ADD 2 LONG SCREWS PIC 11
4 ADD 2 NUTS TO LONG SCREWS
5 MOUNT TANK WITH 2 NUTS
6 ADD TANK VENT TO CLEAR LINE PIC 12
7 CONNECT BLACK FUEL LINE TO CARB
8 ADD YELLOW RUBBER LINE TO FRONT BRACKET PIC 5
9 REMOVE 2 LOWER STARTER SCREWS AND INSTALL MOUNT PIC 1
10 REMOVE BACK STAND AND ADD NEW ONE PIC 7