Liftmaster MJ5011U Commercial Medium-Duty Jackshaft Operator Universal Mount

Description

Liftmaster MJ5011U Commercial Medium-Duty Jackshaft Operator Universal Mount
Universal Install
1/2 HP 115V Single Phase
UL325 Compliant, built in 315 MHz receiver
CPS-U Commercial Photo Cell System
3 button station, open/close/stop
1" bore, 32 tooth sprocket for #41 chain
UL-325 Compliant
For openings up to 30'W (indoor use only)
Includes: emitter, receiver, floor/wall mounting brackets
Compatible with logic 2, 3, 4 & 5
24VAC
Performance:
115 volt 1 Ɵ. Apply Open/Close/Stop functions with the standard three-push-button control station. Controls with one, two and three buttons are available. Receive notifications when routine maintenance is required on your Commercial Door Operator. Improve durability with the NEMA 1 type electrical box construction with a powdercoat finish. Mount on the left or right side of the door. No rails to hang, the operator simply mounts on the wall and attaches to the door shaft through chain and sprocket. (3900 can mount directly to shaft) Enable limit setting for ease of installation and adjustment to ensure accuracy even after a power failure. Automatically close the door with Timer-To-Close (programmable in 1-second or 15-second increments).
Safety And Security
Compliant with all UL 325 requirements.
Accept up to 20 remote controls and unlimited DIP switch remote control with our Security+® radio technology.
Protect against door and operator damage due to obstacles with the Adjustable Friction Clutch.
Signal the door to reverse or stop if closing time exceeds maximum door travel prevent damage to door and operator.
Provide easy, emergency manual operation using a readily accessible disconnect.
CPS-U Monitored Commercial Protector System.