CO-Z 1400lbs Automatic Sliding Gate Opener Door Hardware Kit Security System

Description

Description：
This sliding gate opener kit works for all gates up to 40ft long and weighing 1400lbs. This system features an auto-close option. You can set the gate to close in 12, 24, or 36 seconds after it opens. You can add up to 20 extra remotes to control this system. It uses an RF hopping code to prevent replay attacks, which makes it impossible for eavesdroppers to record the transmission to replay it later to open the gate. The gate must be on a level ground and cannot operate on a slope. In case of a power outage or any emergency, you may also use a manual release key to open the gate.
FEATURES：
Our sliding gate opener uses an AC motor. It has a power supply of 200W. The high capacity and big torque allow up to 1400lbs bearing.
The remote operates simply and prevents conflicting orders by using any of its buttons to toggle through the actions OPEN, STOP, CLOSE, and STOP. One gate opener can be controlled by up to 20 remotes.
This system features an auto-close option. You can set the gate to close in 12, 24, or 36 seconds after it opens. There is also a pedestrian mode that the gate will open about 1-5ft for people to pass through.
It uses an RF hopping code to prevent replay attacks, which makes it impossible for eavesdroppers to record the transmission to replay it later to open the gate.
Specifications：
Maximum Gate Weight: 1400lbs
Maximum Gate Length: 40ft (includes 20ft of chain)
Power Supply: 110V AC, 60Hz
Gate Move Speed: 43ft/min (8.5"/second)
Motor Speed: 55RPM
Output Power: 200W
Remote Control Range: 100ft (Frequency: 433.92 MHz)
Output Shaft Height: 48mm
Max. Gate Weight: 1400lbs
Output Torque: 16Nm
Limit Switch: Magnetic Limit Switch
Noise: <56dB
Max # of Remotes 20
Duty Cycle: S2, 15 Minutes
Operating Temperature: -4°F~+122°F (-20°C~+50°C)
PACKAGE LIST
1*Sliding gate opener
2* Manual release keys
2* Remote controls
1*Box of accessories (2x 3M chains and a screw kit)