ABSOLUTE KITCAP4GAR 3 Farad Power Capacitor, 4 Gauge Car Audio Amplifier Amp Kit

Description

Absolute KITCAP4GAR 3 Farad Red Power Car Capacitor for Energy Storage to Enhance Bass Demand from Audio System &
4 Gauge Car Amplifier Installation Wiring Complete Kit
Car Audio Capacitor is Used to Prevent Dimming of Dash Lights and Headlights When Playing Loud Bass Notes. They Work by Supplying the Car Amplifier with Rapid Jolts of Power. A Car Audio Power Cap Works by Storing Large Amounts of Electrical Power Which It Can Then Deliver to Power Hungry Components When Called Upon to Do So. They Have an Advantage Over Typical Lead Acid Storage Batteries Because They Have Very Low Internal Resistance. This Allows Them to Deliver Large Amounts of Power (Current) Very Quickly. Much Faster Than A Car's Charging System Can Deliver That Same Amount of Current. Car Audio Power Amplifiers Can Have Very Large Current Demands. This Is Dependent on The Music Being Played Through the Amplifier. Typically, These Currents Are Only Needed in Short Bursts During Transient Peaks (Bass Drum Note, Etc.). If the Amplifier Tries to Pull This Current from The Electrical System Directly It May Cause A Drop in Voltage Called A Sag. This Sag Is Equivalent to A Voltage Drop in The System and The Size of The Drop Depends on The Resistance of The Wire from The Source (Battery) to the Amplifier.
Product Features:
3 Farad Digital Capacitor With 3000 Watts
Runs On 10-16 Volts DC
Audible Warning Tone for Reverse Polarity, Voltage Overload and Low Battery Voltage
Capacitance: 3,000,000,
Capacitance Tolerance: + / - 10%,
Voltage Measurement Accurate To + / - 0.1 VDC
Equivalent Series Resistance: 0.00195 Mw @ 120 Hz / 25°C
You May Also Hook Up as Many as You Like in Parallel to Make a Bank of Power
Stabilizing Amplifier Flow Capacity
High Strength Cylindrical Aluminum Housing
Soft Turn-On/Off Power Surge
Bright Charging Status L.E.D.
Digital Over-Voltage Protection System
Perfect for Systems Up to 3000W Max
Increases Level of Bass, And the Peak Power of Your Amp
Features Audible Warning Indicators
Runs On 10-16 Volts Dc
Equipped with Automatic Shutoff Protection
Accepts Any Gauge of Wire with Ring Terminals
3 Farad Digital Power Capacitor
24 Volts Surge Ultra Low ESR (
Super Low
Internal Resistance )
3 Digit Bright Red Digital Led Voltage Display
Audible Warning Tone for Reverse Polarity, Voltage Overload, And Low Battery Voltage
Capacitance: 3,000,000
Capacitance Tolerance: + / - 10%,
Voltage Measurement Accurate To + / - 0.1 VDC
Working Voltage: 10-16 VDC,
Automatic Shutoff Protection
Includes Clear Mounting Brackets
Includes the Resistor for Charging
Reduce or Stop the Dimming of Your Headlights
Accepts any gauge of wire with ring terminals
Width of Mounting Bracket Base: 5-1/2"
Dimensions: 11-3/4"H X 3-1/2"W X 3-1/2"D
3 Year Warranty
Equivalent Series Resistance:
You May Also Hook Up as Many as You Like in Parallel to Make A Bank of Power.
Absolute  4 Gauge 2000W Pro Car Amplifier Complete Installation Amp Kit Power Wiring with Red Accent Color Scheme
General Features:
4 Gauge Power Amplifier Installation Kit
Designed to Install One Amplifier
Designed Specifically for 2000 Watts Peak Power Rating
Power and Ground Wire Provides Optimal Power Transfer
Made from 100% oxygen free Tinned Copper Plated (CCA) for a Pure Uninterrupted Transfer of Power
Includes AGU Fuse Holder for Ideal Protection
Premium 2 Channel RCA Interconnect Cable Included
3 Year Manufacturer's Warranty
Product Specifications:
17 Feet of Red 4 Gauge High Current Power Cable
3 Feet of black 4 Gauge Ground Cable
15 Feet of RCA Triple Shielded Interconnect Audio Cable
20 Feet of 12 Gauge OFC Speaker Cable
20 Feet of 16 Gauge Remote Turn-on Wire
6 Feet of Split Loom Tubing
1 Gold Plated 80 AMP AGU Fuse
1 4 AWG Gold Gang Terminal
1 4 AWG Water Resistant Inline Fuse Holder
2 Ring Terminals
2 Spade Terminals (4 Gauge)
5 Spade Terminals (14-16 Gauge)
3 Self Tapping Screws
1 Rubber Grommet
20 Black Cable Ties
2 Butt Connectors (18-22 Gauge)
1 Butt Connector (4 Gauge)